Area Calculator

All free toolsGeometry Calculators
Geometry CalculatorsFree online tool

Area Calculator

Calculate the area of common two-dimensional shapes.

For polygons, the calculator assumes a regular polygon. Use consistent units for all dimensions; the result is in the corresponding square unit.

Free online tool by SOCE. Check inputs and results before using them for important decisions.

Area Calculator – Free Online Geometry and Area Formula Guide

The SOCE Area Calculator page helps students, teachers, architects, engineers, construction professionals, and mathematics learners understand how to calculate the area of common two-dimensional geometric shapes.

Area is one of the most important measurements in geometry. It describes the size of a two-dimensional region and is expressed in square units, such as square metres (m²), square centimetres (cm²), square feet (ft²), or square inches (in²).

Whether you need to calculate the area of a rectangle, square, triangle, circle, parallelogram, or trapezoid, this Area Calculator guide explains the relevant mathematical formulas with step-by-step examples and practical applications.

What Is an Area Calculator?

An Area Calculator is a mathematical tool used to determine the amount of two-dimensional space enclosed by a geometric shape.

Different shapes require different formulas because their geometric properties are different.

For example, the area of a rectangle is calculated by multiplying its length by its width, while the area of a circle depends on the square of its radius.

A reliable area calculation requires the correct shape, appropriate dimensions, consistent measurement units, and the relevant mathematical formula.

Understanding Area

Area measures a two-dimensional region.

For example, a rectangular floor measuring 5 metres long and 4 metres wide has an area of:

A = 5 × 4

Area = 20 m²

This means the floor covers 20 square metres.

How to Use the Area Calculator

The general process for calculating area is:

  1. Identify the geometric shape.
  2. Determine which dimensions are required.
  3. Measure or obtain the dimensions.
  4. Ensure that all length measurements use compatible units.
  5. Select the appropriate area formula.
  6. Substitute the dimensions into the formula.
  7. Calculate the area.
  8. Express the result in the correct square units.

For example, if a rectangle has a length of 8 metres and a width of 6 metres:

A = length × width

A = 8 × 6

Area = 48 m²

The result represents the area enclosed by the rectangle.

Area Calculator Formulas for Common Shapes

The following formulas are commonly used in geometry.

Shape Area Formula
Square A = s²
Rectangle A = l × w
Triangle A = ½ × b × h
Circle A = πr²
Parallelogram A = b × h
Trapezoid A = ½ × (a + b) × h
Rhombus A = ½ × d₁ × d₂
Ellipse A = πab
Regular polygon A = ½ × P × a

Where:

  • A = area.
  • s = side length of a square.
  • l = length.
  • w = width.
  • b = base.
  • h = perpendicular height.
  • r = radius.
  • d₁ and d₂ = diagonals of a rhombus.
  • a and b = semiaxes of an ellipse, where applicable.
  • P = perimeter of a regular polygon.
  • a = apothem of a regular polygon, where applicable.
  • π ≈ 3.141592653589793.

The correct interpretation of each symbol depends on the selected formula.

Rectangle Area Calculator

A rectangle is a quadrilateral with four right angles.

Its opposite sides have equal lengths.

Rectangle Area Formula

A = l × w

Where:

l = length

w = width

Worked Example

A rectangular room measures:

Length = 12 m

Width = 8 m

Calculate the area.

A = 12 × 8

Answer: 96 m²

This formula is useful for calculating floor areas, rectangular plots, walls, and other rectangular surfaces.

Square Area Calculator

A square has four equal sides and four right angles.

Square Area Formula

A = s²

Where:

s = length of one side.

Worked Example

A square tile has a side length of 6 cm.

A = 6²

A = 6 × 6

Answer: 36 cm²

If the side length is doubled, the area becomes four times as large.

For example:

Original side = 6 cm

New side = 12 cm

New area = 12² = 144 cm²

The area increases from 36 cm² to 144 cm².

Triangle Area Calculator

A triangle is a polygon with three sides.

The standard area formula uses a base and its corresponding perpendicular height.

Triangle Area Formula

A = ½ × b × h

Where:

b = base length

h = perpendicular height

The height must be measured at a right angle to the selected base or its extension.

Worked Example

A triangular region has:

Base = 10 m

Height = 7 m

A = ½ × 10 × 7

A = 35

Answer: 35 m²

Right Triangle Area

For a right triangle, the two perpendicular legs can be used as the base and height.

Suppose the legs measure 6 cm and 8 cm.

A = ½ × 6 × 8

Answer: 24 cm²

Triangle Area Using Heron’s Formula

When the lengths of all three sides are known, Heron’s formula can be used without directly measuring the height.

Let the triangle’s side lengths be a, b, and c.

First calculate the semiperimeter:

s = (a + b + c)/2

Then:

A = √[s(s − a)(s − b)(s − c)]

The side lengths must satisfy the triangle inequality for a non-degenerate triangle.

Worked Example

A triangle has sides:

a = 13 cm

b = 14 cm

c = 15 cm

Calculate the semiperimeter:

s = (13 + 14 + 15)/2

s = 21 cm

Apply Heron’s formula:

A = √[21(21 − 13)(21 − 14)(21 − 15)]

A = √(21 × 8 × 7 × 6)

A = √7056

Answer: 84 cm²

Heron’s formula is useful when three side lengths are available but the perpendicular height is unknown.

Circle Area Calculator

A circle is the set of points in a plane at a fixed distance from its centre.

That fixed distance is the radius.

Circle Area Formula

A = πr²

Where:

r = radius

π ≈ 3.141592653589793

Worked Example

Calculate the area of a circle with radius 5 m.

A = π × 5²

A = 25π

Answer: 25π m² ≈ 78.54 m²

Circle Area Using Diameter

The diameter is twice the radius:

d = 2r

Therefore:

r = d/2

Substituting into the circle area formula:

A = πd²/4

For a circle with diameter 10 m:

A = π × 10²/4

A = 25π

Answer ≈ 78.54 m²

Parallelogram Area Calculator

A parallelogram is a quadrilateral with two pairs of parallel opposite sides.

Parallelogram Area Formula

A = b × h

Where:

b = base

h = corresponding perpendicular height

Worked Example

A parallelogram has:

Base = 12 cm

Perpendicular height = 7 cm

A = 12 × 7

Answer: 84 cm²

The sloping side length must not be substituted for the perpendicular height unless it is actually perpendicular to the selected base.

Trapezoid Area Calculator

A trapezoid, under the common convention used here, is a quadrilateral with a pair of parallel sides.

The parallel sides are called the bases.

Trapezoid Area Formula

A = ½ × (a + b) × h

Where:

a = first parallel side

b = second parallel side

h = perpendicular distance between the parallel sides

Worked Example

A trapezoidal plot has:

First parallel side = 10 m

Second parallel side = 16 m

Height = 6 m

A = ½ × (10 + 16) × 6

A = ½ × 26 × 6

Answer: 78 m²

This formula is useful for idealised trapezoidal regions in geometry, land measurement, and engineering calculations.

Rhombus Area Calculator

A rhombus is a quadrilateral with four equal side lengths.

Its diagonals are perpendicular.

Rhombus Area Formula

A = ½ × d₁ × d₂

Where:

d₁ = first diagonal

d₂ = second diagonal

Worked Example

A rhombus has diagonals:

d₁ = 12 cm

d₂ = 16 cm

A = ½ × 12 × 16

Answer: 96 cm²

A rhombus can also be evaluated using the parallelogram formula when its base and perpendicular height are known.

Ellipse Area Calculator

An ellipse is a closed curve defined by two perpendicular semiaxes.

Ellipse Area Formula

A = πab

Where:

a = semimajor axis

b = semiminor axis

Both quantities represent distances from the centre to the ellipse boundary along their respective principal axes.

Worked Example

An ellipse has:

Semimajor axis = 6 m

Semiminor axis = 4 m

A = π × 6 × 4

A = 24π

Answer ≈ 75.40 m²

If the full major and minor axis lengths are provided instead, divide each by 2 before applying this formula.

Regular Polygon Area Calculator

A regular polygon has equal sides and equal interior angles.

For a regular polygon, area can be calculated using the perimeter and apothem.

Regular Polygon Area Formula

A = ½ × P × a

Where:

P = perimeter

a = apothem, the perpendicular distance from the centre to a side

Worked Example

A regular hexagon has:

Side length = 4 cm

Apothem = 2√3 cm

Its perimeter is:

P = 6 × 4 = 24 cm

Therefore:

A = ½ × 24 × 2√3

A = 24√3

Answer ≈ 41.57 cm²

This formula applies to regular polygons, not arbitrary irregular polygons.

Sector Area Calculator

A circular sector is the region enclosed by two radii and their intercepted arc.

Sector Area Formula in Degrees

A = (θ/360°) × πr²

Where:

θ = central angle in degrees

r = radius

Sector Area Formula in Radians

A = ½r²θ

where θ is measured in radians.

Worked Example

A circular sector has:

Radius = 6 cm

Central angle = 60°

A = (60/360) × π × 6²

A = 6π

Answer ≈ 18.85 cm²

Always distinguish between degrees and radians when applying sector formulas.

Area Calculator for Composite Shapes

A composite shape consists of two or more simpler geometric regions.

Its total area can often be calculated by adding the areas of non-overlapping parts or subtracting excluded regions.

Worked Example: L-Shaped Floor

Suppose an L-shaped floor can be represented as:

  • An outer rectangle measuring 10 m × 8 m.
  • A rectangular cutout measuring 4 m × 3 m.

Outer rectangle area:

A₁ = 10 × 8 = 80 m²

Cutout area:

A₂ = 4 × 3 = 12 m²

Total L-shaped area:

A = A₁ − A₂

A = 80 − 12

Answer: 68 m²

This method is useful for rooms, floor plans, slabs, and other composite planar regions.

Area Unit Conversion

Area is measured in square units.

Common units include:

  • Square millimetres (mm²).
  • Square centimetres (cm²).
  • Square metres (m²).
  • Square kilometres (km²).
  • Square inches (in²).
  • Square feet (ft²).
  • Square yards (yd²).
  • Acres.
  • Hectares.

Important Area Conversions

1 m² = 10,000 cm²

1 m² = 1,000,000 mm²

1 ft² = 144 in²

1 m² ≈ 10.7639 ft²

1 hectare = 10,000 m²

1 acre = 4,046.8564224 m²

Worked Example

Convert 25 m² into square centimetres.

25 × 10,000

Answer: 250,000 cm²

When converting area, the linear conversion factor must be squared.

For example, because 1 m = 100 cm:

1 m² = (100 cm)²

= 10,000 cm²

Difference Between Area, Perimeter, Surface Area and Volume

These measurements describe different geometric properties.

Area

Area measures a two-dimensional region.

Example:

A rectangular floor measuring 5 m × 4 m has an area of 20 m².

Perimeter

Perimeter measures the total boundary length of a two-dimensional shape.

For the same rectangle:

P = 2(5 + 4)

Perimeter = 18 m

Surface Area

Surface area measures the total area of specified surfaces of a three-dimensional object.

For example, the total surface area of a cube with side length s is:

SA = 6s²

Volume

Volume measures the three-dimensional space occupied by a solid.

For a rectangular prism:

V = l × w × h

Volume is measured in cubic units, not square units.

Area Calculator for Civil Engineering

Area calculations are important in civil and structural engineering, architecture, surveying, and construction.

Building Floor Area

Rectangle and composite-shape formulas can be used to estimate geometric floor areas from dimensions.

However, gross floor area, net usable area, and other regulatory area measures may follow specific definitions.

Concrete Slab Geometry

The plan area of a rectangular slab is:

A = length × width

For a slab measuring 6 m × 5 m:

A = 30 m²

If the slab has uniform thickness t, its ideal geometric concrete volume is:

V = A × t

Actual quantity estimation may require adjustments for openings, edge details, and other geometric features.

Wall Surface Area

For a rectangular wall face:

A = length × height

A wall measuring 8 m long and 3 m high has a gross face area of:

A = 24 m²

Door and window openings may need to be deducted depending on the measurement purpose.

Land and Site Planning

Area calculations are useful for simple rectangular, triangular, and trapezoidal plots.

Irregular boundaries may require surveying coordinates, triangulation, or specialised geometric methods.

Painting and Finishing

Area calculations can support preliminary estimates of wall, ceiling, flooring, and coating quantities.

Material requirements also depend on coverage rates, waste allowances, and application specifications.

Structural Section Properties

Cross-sectional area is important in structural engineering.

For example, the axial stress under a uniformly distributed concentric axial force is:

σ = P/A

where:

σ = average normal stress

P = axial force

A = cross-sectional area

The appropriate section area and structural assumptions must be used.

Common Mistakes When Calculating Area

  1. Using inconsistent units: Convert dimensions to compatible units before calculating.
  2. Confusing area with perimeter: Area uses square units; perimeter uses linear units.
  3. Using a sloping side instead of perpendicular height: This can produce incorrect triangle, parallelogram, or trapezoid areas.
  4. Using diameter as radius: The circle formula A = πr² requires radius.
  5. Forgetting to square the radius: Circle area depends on r².
  6. Applying a regular polygon formula to an irregular polygon: Different geometry may require another method.
  7. Ignoring cutouts in composite shapes: Subtract excluded regions when appropriate.
  8. Using negative dimensions: Physical lengths should not be negative.
  9. Rounding too early: Keep sufficient precision until the final calculation.
  10. Confusing area and volume: Multiplying area by thickness produces volume, not another area.
  11. Incorrectly converting square units: Area conversion factors are squared linear factors.
  12. Ignoring the measurement definition: Engineering and regulatory area measurements may use specialised conventions.

Frequently Asked Questions About Area Calculator

1. What is an Area Calculator?

An Area Calculator is a mathematical tool used to determine the size of a two-dimensional geometric region.

2. What is the formula for the area of a rectangle?

A = length × width.

3. What is the formula for the area of a square?

A = side².

4. How do you calculate the area of a triangle?

Multiply the base by its corresponding perpendicular height and divide by 2.

5. What is the formula for the area of a circle?

A = πr², where r is the radius.

6. How do you calculate the area of a trapezoid?

Use A = ½(a + b)h, where a and b are the parallel side lengths and h is their perpendicular separation.

7. What is the area of a circle with radius 5?

The area is 25π square units, approximately 78.54 square units.

8. What is the difference between area and perimeter?

Area measures an enclosed two-dimensional region, while perimeter measures its boundary length.

9. What units are used to measure area?

Area is measured in square units such as m², cm², ft², and in².

10. How many square feet are in one square metre?

One square metre is approximately 10.7639 square feet.

11. Can area be calculated for irregular shapes?

Yes. Depending on the available geometry, irregular regions can be divided into simpler shapes or evaluated using coordinate-based methods.

12. Why is area calculation important in engineering?

Area calculations are used in geometry, structural section properties, building measurement, material estimation, land planning, and engineering analysis.

Learn Area Formulas with SOCE

The SOCE Area Calculator page provides mathematical formulas, worked examples, and practical explanations for calculating areas of common geometric shapes.

Use this Area Calculator resource to understand rectangle, square, triangle, circle, parallelogram, trapezoid, and other area formulas.

Explore additional mathematics and engineering resources available through SOCE.